Especificaciones:
General
Standards
- IEEE 802.1Q VLAN tagging
- IEEE 802.3x flow control
- IEEE 802.3an 10GBASE-T
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3az Energy-Efficient Ethernet (EEE)
- IEEE 802.3ad teaming
- PCI Express x8 2.0, 5 GT/s compliant
Power
- Maximum Power Consumption: 23.38 W
- Input Voltage: 3.3 V and 12 V
Data Transfer Rate
- 1 Gbps Full Duplex
- 10 Gbps Full Duplex
- Auto mode (support 100 Mbps)
Transmit Distance
- 10GBASE-T
- 100M with Cat 6A or higher UTP
- 50M with Cat 6 UTP
- 100/1000BASE-T
- 100M with Cat 5 or higher UTP
Interface Slot
- PCI Express v2.0 x8/x16 slot
Supported Functions
- NIC partitioning
- Other performance features
- TCP, IP, UDP checksum
- TCP segmentation
- Adaptive interrupts
- Receive Side Scaling (RSS)
- Manageability
- Statistics for SNMP MIB II, Ethernet-like MIB, and Ethernet MIB
- SMBus controller
- IPMI support (IPMI pass thru mode)
- Advanced network features
- Jumbo frames (up to 9 KB)
- Virtual LANs
- Smart load balancing teaming
- LiveLink™ (supported in both the 32-bit and 64-bit Windows operating systems)
- Logical Link Control (IEEE Std 802.2)
- Layer-2 Priority Encoding (IEEE Std 802.1p)
- High-speed on-chip RISC processor
- Up to 3 classes of service (CoS)
- Integrated 96 KB frame buffer memory
- Quality of Service (QoS)
- Support for multicast addresses via 256 bits hashing hardware function
- JTAG support
- PCI Power Management Interface (v1.1)
- 64-bit BAR support
- iSCSI Boot support
- Virtualization
- Microsoft
- VMware
Functionality
Driver Support
- Windows Server 2008 (x86, x64)/2008 R2 (x64)
- Windows Server 2012
- RHEL 6.4/6.5 (x64), RHEL 5.9 (x64)
- SLES 11.2/11.3 (x64)
- Solaris 11/11.1
Diagnostic LED
Physical
Dimensions
• 181 mm x 120.9 mm x 21.6 mm (7.13 x 4.76 x 0.85 inches)
Temperature
- Operating: 0 to 40 °C (32 to 104 °F)
- Storage: -20 to 70 °C (-4 to 158 °F)
Humidity
- Operating: 10% to 90% non-condensing
- Storage: 10% to 90% non-condensing
Certifications